Clamp Carrier - Hydraulic - 6 Sections x 8 Clamps

Product type : Hydraulic Clamp Carrier (Hydraulic Tightener) — China make.
Configuration: 6 sections × 8 clamps.
Total Clamps : 48 Clamps
Clamping method: Hydraulic cylinders with individual clamp heads.
Max working (clamping) width: up to 2,600 mm (2.6 m).
Maximum board/panel thickness (clamp opening): 25 – 90 mm (adjustable).
Minimum board thickness: ≈ 5 mm (with spacer/adapter).
Clamp stroke: 0 – 100 mm (adjustable travel).
Hydraulic working pressure: 6 – 10 MPa (≈ 60 – 100 bar) (typical rating).
Clamping force per clamp: 2 – 8 kN (depending on cylinder size / model).
Hydraulic power unit: Electric motor driven pump; 1.5 – 3.0 HP (1.1 – 2.2 kW) typical.
Hydraulic pump flow: ~3 – 8 L/min (depending on pump selection).
Hydraulic oil tank capacity: 20 – 60 L (typical).
Control: Push-button control panel with Start/Stop, Clamp/Release, Emergency Stop; optional PLC control.
Clamp carriage travel / working depth: ≈ 1,000 – 1,400 mm (board length compatibility).
Cycle time (clamp → release): 8 – 25 seconds (depending on load & pump).
Construction / frame: Heavy welded steel frame with precision guides.
Guide system: Hardened steel guide-rails or linear guides for carriage stability.
Clamp jaw type: Quick-change rubber or serrated steel jaws (anti-mark option).
Surface finish: Industrial paint with corrosion protection; exposed surfaces machined.
Dust & glue resistance: Sealed hydraulic components and guarded joints for glue/dust environments.
Safety features: E-stop, safety guards, pressure relief valve, overload protection.
Installation requirements: 3-phase or single-phase power (specify by model), leveled concrete floor, earthing/grounding, adequate ventilation for hydraulic unit.
Operating air (if pneumatic hold-downs): 6 bar (only if pneumatic hold-downs provided).
Net weight (approx): 600 – 1,200 kg (depends on length and construction).
Packing dimensions (approx): L×W×H based on model; typically shipping crate required.
Optional accessories: Additional clamp sets, extended bed, anti-mark jaws, PLC timer, remote control, spare hydraulic seals.
Recommended maintenance: Change hydraulic oil every 6–12 months, check seals monthly, greasing of guide rails weekly.
Warranty & support: Standard supplier warranty (specify with vendor) and recommended OEM spare parts list.